Hydac HDA 5500 Bedienungsanleitung

Display UnitHDA 5500 Operator Manual Release 4.0xdate:10.05.04

9display SettingSettingrangePre-setting deviceSwitching mode SP 2 (SM 2)SP 2 operates with adjustableSP and hysteresis functionSP 2 operates in window

10display SettingSettingrangePre-setting deviceSwitch Point source SP 4 (SS 4) Sensor 1 is activated to SP 4 Sensor 2 is activated to SP 4Sen1Sen2Sen.

11display SettingSettingrangePre-setting device current value Sensor 3 Minimum value Sensor 3 maximum value Sensor 3Sen.3Min.3Top.3HDA 5500 - 1 - X -

12display SettingSettingrangePre-setting deviceDecimal places Sensor 1number of decimal places for sensor 1 shown in thedisplay0..0.000 0.0 For all de

13display SettingSettingrangePre-setting deviceLower display range (Low Range) Sensor 2Lower display range limit-999..9899 0.0 HDA 5500 - 1 - X - XX -

14display SettingSettingrangePre-setting deviceAssign the analog output to the sensor Assign sensor 1 to the analog output Assign sensor 2 to the anal

15HDA 5500 Order CodeHDA 5 5 0 0 – X – X – XX – 0 0 0Inputs0 = 1 Analog Ínput1 = 3 Analog Inputs2 = 1 Analog Input + Frequency In

Press and hold the mode button for 5 seconds to change menu settings. Power down/up the unit while pressing both arrow keys to Free/Lock the settings.

13.2.1 Pin connectionSupply voltage connector X1X1device PIN description VarianteHDA 5500 – X – X – AC – 000~ / ~Supply voltage 85VAC bis 265VAC 50/

23.2.2 Connection diagramm of the HDA 55003.2.2.1 Connection of the supply voltage3.2.2.2 Connection of the sensor with voltage signal(IN2 and IN3 onl

33.2.2.3 Connection of the sensor with current signal(IN2 and IN3 only for HDA 5500 – 1 – X – XX – XXX)3.2.2.4 Connection of the sensor with current

43.2.2.5 Analog output for current signal (for all devices)3.2.2.6 Analog output for voltage signal (for all devices)Analog. OutAGNDRLmin>=Vout =A

53.2.2.7 Seriel interface (all devices)Settings: 19200 Baud – 8 Data bits – 1 Startbit – 1 Stopbit – noParity Bit and no handshake.3.2.2.8 Digital Inp

63.2.2.8 Pt100 Input (HDA 5500 – 3 – X – XX – XXX)3.2.2.9 Connection of the relais(SP1 and SP2 for HDA 5500 –X– 1 – XX – XXX and HDA 5500 –X– 2 – XX –

74. Front unit of HDA 5500HDA5500MODEMODE1324Relais123Sensor4-digitdisplayrelais-LEDfhighlightedfor active SPSensor LEDhighlighted foractive sensorso

87.2 BASIC SETTINGSdisplay SettingSettingrangePre-setting deviceSwitch Point source 1 (SS 1) Sensor 1 is aktivated to SS 1 Sensor 2 is aktivated to