Hydac EDS 1700 Bedienungsanleitung PDF herunterladen (Seite 23)

3. Operating keys on the membrane keypad

undo screws to remove

operating panel

4-digit

digital display

4. Digital display

After switching on the supply voltage, the unit briefly displays "EdS" and then

displays the current pressure.

Notes:

l In the basic settings the display can be altered so that, once switched on, the

unit displays a switching point or the maximum value permanently. In this

case "S.P. 1", "S.P. 2", "S.P. 3", "S.P. 4", or "MAX" appears briefly on the

display following the switch-on message. The current pressure can be

displayed briefly by pressing the "+" or "-" key.

l If the current pressure exceeds the nominal pressure of the unit, it can no

longer be displayed and the display begins to flash.

l If the current pressure is below 0.5% of the nominal range, then 0 is

displayed.

keys for setting the switching points

and additional functions

2 s

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

Keine Kommentare

Hydac EDS 1700 Bedienungsanleitung Seite 23